Products

MODELS EN AND VEN

Models EN and VEN are economy priced, but still provide most functional features of other Air Locke seals, both are made of neoprene and are plank-mounted to outer building wall. Models EN and VEN extend outward 14" from building wall. Models EN 20 and VEN 20 each extend outward 20".All fit docks 46" to 50" high and seal trucks to 8' wide. Models EN (or EN 20)seals trucks 12' to 13'6" high while Model VEN (or VEN 20) has adjustable upper seal to accommodate trucks 11' high. All are inflated by a 1/10 hp wall mounted blower.

MODELS HP AND HVP

Both models are uniquely designed to provide 100% unobstructed access to full height of truck and trailer openings. Top section lifts away from truck automatically each time seal is deflated. Both sides fall back against wall. Seal is inflated against the truck after vehicle is in place. BOTH are crafted of 16oz neoprene coated nylon. Model HP provides sealing capacity for all trucks 12', and higher. HVP's capacity is 11'0" and higher. All metal frames, galvanized and aluminum. No wood to deteriorate. Track mount slides simply snap in place.

HP & HVP Side Legs

• Optional HP & HVP Side Legs Brochure
• Optional HP & HVP Side Legs Specifications

MODELS SP AND VSP

Both models inflate down against the top, and inward against the sides of semi trailers and trucks, without intruding into the rear opening of the carrier. Both are crafted of neoprene-coated nylon and are inflated in seconds with a 1/10 hp blower mounted directly into the head section. The Model SP, seals trucks 12' to 13'6" high, while the Model VSP, seals seals trucks down to 11' high. The Model VSP. is constructed with a special head section, enabling it to seal a lower carrier, thus making it more versatile.

MODELS FP AND FVP

The Models FP and FVP are perimeter seals supplied with the mounting frame (all metal).These units give full unobstructed access to the vehicle both in width and height. The blower is constructed under the canopy portion of the seal, out of the elements. To seal the truck, the head section inflates down on the roof and the side members come out from the wall and make a 90° turn against the sides of the vehicle. The FP will seal any vehicle from 12'0" to 13'6" high while the FVP will inflate 12" lower to an 11'0" high truck. These seals are crafted from a tough, flexible, neoprene coated nylon.

MODEL RS2

MODEL RS2 features formed square corners, an insulated passageway to and from the rail car, and a tight seal. Specially-designed stretch cords support the MODEL RS2 on the outer wall when deflated.

Design creates trough on upper seal to disperse water to both sides. Standard size provides access to full width of 10' and height of 9'6". Outward protection is determined by wall to center-of-track distance. Inflated by a switch-operated, 1/6 hp wall mounted blower (switch not included).

MediGate custom-designed, inflatable entrance seals by air Locke offer a simple, cost-effective way to protect patients, hospital personnel and sensitive medical equipment from the elements and other potential hazards while in transit between the scanner vehicle and hospital access point.
Currently in use at more than 450 hospitals and medical centers throughout the country, MediGate perimeter seals inflate in just minutes to eliminate exposure to wind, rain, snow and temperature extremes, and are guaranteed to fit all vehicles participating in your mobile diagnostic equipment program.

• MediGate Seals Checklist
• MediGate Brochure
• MediGate Specifications

Gangway & More

Almost every casino ship is outfitted with a Gangway Seal by air Locke. This seal is designed to make a link between the land side and the Casino ships providing a passageway for it's passengers as they embark and disembark from the ship. This seal is custom made for each ships particular need.